Omron NJ Series Startup Manual page 86

3 Implementation Example of Static Pick-and-place Equipment
Importing 3D CAD Data
Import the 3D CAD data of the conveyors as 3D shape data to the Sysmac Studio.
This section describes the procedure to import the 3D CAD Data of Conveyor A and Conveyor B used
in the equipment model in 1-3 Operations of Static Pick-and-place Equipment on page 1-5.
1
Select Application Manager from the Insert menu on the main window of the Sysmac Studio.
The Add Device dialog box is displayed.
2
Select Category, Device, and Version as shown in the figure below, and then click the OK
button.
ApplicationManager0 is added to the drop-down list at the top of the Multiview Explorer
3-36
NJ-series Robot Integrated System Startup Guide (O049)