Cordless Headset; Cordless Headset Features; Answering Calls; Hanging Up - Mitel 50005070 User Manual

Cordless Headset

The cordless headset offers the same capability as the cordless handset to make and answer
endpoint calls away from your desk, while adding the convenience of hands-free operation.
When not in use, the cordless headset sits in the headset charging cradle. For more information
on alerting tones and LEDs, see "Alerting Tones and LEDs" on
To use the cordless headset, you must pair the headset with the endpoint. For more information,
see "Pairing the Cordless Module and Devices" on

Cordless Headset Features

The cordless headset is shown here.

Answering Calls

To answer a call:

Hanging Up

If you are out of range for more than 10 seconds, any call that is in progress is dropped and not
recovered.
To hang up:
Mitel ® Model 5330/5340 User Guide – Issue 2, October 2008
41
5
1 – Microphone
2 – Boom arm
3 – Linked Indicator (LED)
Do one of the following:
•
Lift the cordless headset from the cradle.
•
If the headset is already out of the cradle, press the hookswitch button on the
headset.
Do one of the following:
•
Replace the cordless headset in the cradle.
•
If the headset is already out of the cradle, press the hookswitch button on the
headset.
page
page 49.
3
2
4 – Volume control
5 – Hookswitch and pairing button
Cordless Devices
50.
1
Page 53