Resetting The Endpoint To The Default Settings; Switching Keymaps - Mitel 50005070 User Manual

Personalizing Your Endpoint

Resetting the Endpoint to the Default Settings

Resetting the endpoint to the default settings does the following:
•
•
•
•
•
•
•
•
•
To reset your endpoint to the default settings:

Switching Keymaps

Keymaps are the default button assignments on your endpoint. Your system may have
programmed an alternate keymap, allowing you to switch between keymap assignments.
Contact your system administrator for more information.
To switch between keymaps when your endpoint is idle:
To switch between keymaps during a call:
Page 16
Returns all volume settings to the default levels. See "Changing Volume Levels" on
page 10.
Cancels Background Music. See "Listening to Background Music" on
Cancels Callback (queue) requests. See "Requesting a Callback (Queuing the Endpoint)"
on page 19.
Restores Handsfree Mode. "Using Handsfree Mode" on
Cancels Manual Call Forwarding. See "Manual Call Forwarding" on
Cancels System Forwarding. See "System Forwarding" on
Cancels Do-Not-Disturb (DND). See "Using Do-Not-Disturb (DND)" on
Restores Page settings. See "Paging Other System Users" on
Resets hunt group calls. See "Hunt Groups" on
Dial 394. Station DEFAULTED appears.
With the handset on-hook, dial 399. The display shows either ALTERNATE (or)
STANDARD KEYMAP IS ACTIVE.
Press (Special), and then dial 399.
page 27.
page
page 43.
Mitel ® Model 5330/5340 User Guide – Issue 2, October 2008
page 11.
page 30.
30.
page 39.
page 41.