Using The Mitel Dect Cordless Headset; Cordless Headset Features; Answering Calls; Hanging Up - Mitel Office 250 User Manual

Using the Mitel DECT Cordless Headset

NOTE
The cordless headset offers the same capability as the cordless handset to make and answer
phone calls away from your desk, while adding the convenience of hands-free operation.
When not in use, the cordless headset sits in the headset charging cradle. For more information
on alerting tones and LEDs, see "Alerting Tones and LEDs" on
To use the cordless headset, you must pair the headset with the IP phone. For more
information, see "Pairing the Cordless Module and Devices" on

Cordless Headset Features

The cordless headset is shown here.

Answering Calls

The following instructions describe how to answer a call.
To answer a call:
Do one of the following:



Hanging Up

If you are out of range for more than 10 seconds, any call that is in progress is dropped and not
recovered.
To hang up:
Do one of the following:


Mitel ® 5360 IP Phone User Guide – , March 2017
This section applies only to the Mitel DECT Cordless Headset. It does not apply to
third-party Bluetooth headsets.
41
5
1 – Microphone
2 – Boom arm
3 – Linked Indicator (LED)
Lift the cordless headset from the cradle.
If the headset is already out of the cradle, press the hookswitch button on the headset.
Replace the cordless headset in the cradle.
If the headset is already out of the cradle, press the hookswitch button on the headset.
page
page
3
2
4 – Volume control
5 – Hookswitch and pairing button
Cordless Devices
86.
84.
1
Page 91