Using The Mitel Dect Cordless Headset; Answer A Call - Mitel 5340 User Manual

Mitel 5330 and 5340 IP Phones User Guide
Blinking: LED is On and Off for equal amount of time
Winking: LED is On for a short period of time and Off for a longer period

USING THE MITEL DECT CORDLESS HEADSET

Note: This section applies only to the Mitel DECT Cordless Headset. It does not apply to third-
party Bluetooth headsets.
The cordless headset offers the same capability as the cordless handset to make and answer
phone calls away from your desk while adding the convenience of hands-free operation.
When not in use, the cordless headset sits in the headset charging cradle.
To use the cordless headset, you must pair the headset with the phone. For more
information, see
1) Microphone
2) Boom arm
3) Link indicator (LED)
4) Volume control with mute switch

Answer a Call

Do one of the following:

Lift the cordless headset from the cradle.

If the headset is already out of the cradle, press the hookswitch button on the headset.
Pairing the Cordless Module and Accessories
Elements of the DECT Cordless Headset
5) Hookswitch and pairing button
(gray section with logo imprinted)
6) Speaker
7) Headband
8) Ear hook
- 80 -
on page 73.