Skoda Octavia III 2013 Service Manual page 97

– Unscrew oil filler plug -A-.
– Screw in the adapter -A- of the Filling device for Haldex cou‐
pling - VAS 6291- into the inspection hole up to the stop.
– Place angular piece -B- in position on adapter -A- and secure.
– Route hose of filling device above drive shaft and pull out of
the vehicle.
• The hose must not sag. It must come out above the left rear
wheel.
– Lower the vehicle.
– Ensure that the the valve -arrow- is closed.
– Screw oil reservoir -A- onto filling device for Haldex coupling -
VAS 6291- .
– Open valve -arrow- and hold oil reservoir as shown in the fig‐
ure.
Then fill the Haldex coupling with oil.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
93
4. Gearbox