Skoda Octavia III 2013 Service Manual page 138

Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
Reset service interval display with the vehicle diagnosis, meas‐
urement and information system -VAS-
The service interval display is reset with vehicle diagnosis, meas‐
urement and information system -VAS- , while observing the
following information:
WARNING
Vehicles from MY 2014 are equipped with a two-channel serv‐
ice interval display with a different service message.
This two-channel service interval display must be reset in 2
steps.
Before reaching the service interval the "open-ended spanner"
symbol is displayed in the display when the ignition is switched
on and the following message is displayed:
♦ "Oil change service in ... days" and/or "OIL CHANGE
SERVICE IN ... DAYS"
or
♦ "Inspection in ... days" and/or "INSPECTION IN ... DAYS"
As soon as the service interval has been reached the "open-
ended spanner" symbol is displayed in the display when the
ignition is switched on and the following message is displayed:
♦ "Oil change service now!" or "OIL CHANGE SERVICE
NOW"
or
♦ "Inspection now!" or "INSPECTION NOW"
• When changing the engine oil, the service interval display
must be reset for the engine oil change ⇒ Vehicle diag‐
nostic tester.
On the diagnostic device, select: "Test plan" → "Bodyshell" →
"Electrical system" → "01 Self-diagnosable systems" → "Dash
panel insert - J285" → "Functions of the dash panel insert" →
"17- Service events" and next "Oil change service (variable)"
→ or "Oil change service".
Continue to follow the instructions on the diagnostic unit.
• During the inspection, the service interval display must be
reset for the inspection ⇒ Vehicle diagnostic tester.
On the diagnostic device, select: "Test plan" → "Bodyshell" →
"Electrical system" → "01 Self-diagnosable systems" → "Dash
panel insert - J285" → "Functions of the dash panel insert" →
"17- Service events" and next "Inspection".
Continue to follow the instructions on the diagnostic unit.
• During the oil change associated with the inspection, both
service interval displays must be reset.
Reset the service interval display with the buttons on the dash
panel insert
When resetting the service interval display using the buttons in
the dash panel insert, observe the following information:
134
6. Electrical System