Skoda Octavia III 2013 Service Manual page 139

WARNING
Vehicles from MY 2014 are equipped with a two-channel serv‐
ice interval display with a different service message.
This two-channel service interval display must be reset in 2
steps.
Before reaching the service interval the "open-ended spanner"
symbol is displayed in the display when the ignition is switched
on and the following message is displayed:
♦ "Oil change service in ... days" and/or "OIL CHANGE
SERVICE IN ... DAYS"
or
♦ "Inspection in ... days" and/or "INSPECTION IN ... DAYS"
As soon as the service interval has been reached the "open-
ended spanner" symbol is displayed in the display when the
ignition is switched on and the following message is displayed:
♦ "Oil change service now!" or "OIL CHANGE SERVICE
NOW"
or
♦ "Inspection now!" or "INSPECTION NOW"
• When changing the engine oil, the service interval display
must be reset for the engine oil change
♦ Vehicles with service intervals -QI6- are automatically re‐
coded to -QI4- as a result of this procedure.
♦ A recoding to -QI6- is only possible with the diagnosis de‐
vice taking the conditions into account
⇒ "6.12 Changing the code of the service intervals", page
138 .
• During the inspection, the service interval display must be
reset for the inspection
• During the oil change associated with the inspection, both
service interval displays must be reset.
For vehicles equipped with the KESSY system:
• Close all vehicle doors.
• Close tailgate and front flap.
Reset "oil change service" display
– Switch off ignition.
– Hold button -3- pressed and at the same time turn on the ig‐
nition until the following message is displayed on the dash
panel insert display:
Reset oil change service?
or
DELETE OIL_CHANGE
– Release button -3- and press it again.
Reset "inspection" display
– Switch off ignition.
⇒ page 135
⇒ page 135 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
.
135
6. Electrical System