Skoda Octavia III 2013 Service Manual page 72

Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
– Carefully insert the air filter insert -3- into the upper part of the
air filter -4- so that it sits fully in the recess.
– Position air filter bottom part -2- on air filter top part -4- and
screw on with screws -1-.
– Position air guide on air filter housing -1-.
– Fit on hose clamps -3- and -4-.
– Fit air filter housing -1- onto the ball pins and press on firmly.
– Connect air guide hose -2- to air filter housing -1-.
– Install the engine cover.
3.13.2 1,6 l MPI petrol engine
Removing
– Detach air guide hose -1- from air filter top part.
– Remove fixing screws -arrows- from upper part of the air filter.
– Place the upper parts of the air filter -3- with complete air guide
to one side.
– Remove air filter insert -2-.
Install
– Check housing and water drainage for contamination and
clean as required .
– Insert the air filter element -2- in the centre of the air filter bot‐
tom part.
– Carefully place the upper part of the air filter -3- onto the lower
part of the air filter carefully and without applying too much
force and screw with fixing screws to the tightening torque.
– Fit the air guide hose -1- back onto the upper part of the air
filter.
Tightening torque
Fixing screw
68
Nm
2