Honda CB160 Shop Manual page 60

56
Fig. 4, I 3 Removing front wheel
Fig. 4. 14 Removing front fender
Fig, 4. 15 Removing speedometer
4. FRAME
3. Loosen the speedometer cable cap and remove
it from the gear box.
(CAUTION)
At disassembly of the speedometer, insure that,
when the cap is loosened and removed, the inner
portion is not dropped. When only the wheel is
removed, the gear box can be removed as fitted
to the speedometer cable.
4. When a proper bench is placed under the engine,
the front brake torque bolt is removed, the 3 X 28
spring cotter pin is straigtened and removed, the
front wheel axle nut is loosened, and the front
wheel axle is pulled out ; the front wheel can be
removed. (Refer to Fig.
4.
13)
5. Loosen four 8 X 1 0 hex bolts and remove the
front fender. (Refer to Fig.
4.
14)
6.
Remove the head lamp rim, the head lamp sealed
beam unit, and two 5 mm hex nuts ; remove the
speedometer assembly.
(Refer to Fig. 4. 15)
7. Loosen two 8 X 20 hex bolts and remove the
head lamp body.