3. I
DISASSEMBING AND ASSEMBLING ENGINE
6.
Remove the left crankcase rear cover and sparate
the cable end together with the clutch cable joint
from the cable core. (Refer to Fig. 3. 5)
7.
Rotate the rear wheel and remove-the clip at the
chain joint and the drive chain joint.
(Refer to
Fig.
3. 6)
8.
Remove the starting motor cable from the switch
connecting section. (Refer to Fig. 3. 7)
9.
Separate the carburetor from the insulator section
at the engine head side. (Refer to Fig. 3. 8)
{CAUTON)
Be careful not to bend the choke rod.
fig.
3.
5
Clutch cable core
Fig. 3. 6
Removing the drive chain joint
fig.
3. 7.,, Rempvi~g •.
V,e,.
starting
,malor ,ceble
Fig. 3. 8
Removing carburetor
11