Motors, Gears, Solenoids, Clutches, And Fans; Media Drive Gearbox With Two Clutches And Solenoid - Xerox WorkCentre C2424DX Service Manual

Motors, Gears, Solenoids, Clutches, and Fans

Media Drive Gearbox with Two Clutches and Solenoid

(PL 4.14)
Videos are available with instructions for replacing the media drive
gearbox. Videos are located on the WorkCentre C2424 Product
training CD-ROM.
1.
Remove the output paper tray and left side cover (page 8-11).
2.
Disconnect the media path motor, deskew clutch, pick clutch, and Tray 1 pick
solenoid wiring harnesses.
3.
Remove 6 screws securing the media drive gearbox and remove the entire
assembly
Caution
Do NOT remove the screw for the Tray 1 pick solenoid.
8-52
Media Drive Gearbox
Pick Clutch
Loosen Only
(Do Not Remove)
Duplex Roller Shaft
Pick Roller Shaft
WorkCentre C2424 Service Manual
s2424-025