Nortel Meridian M3900 Reference Manual page 47

Table 9
M3903 keys
Key Description
Options key •
(continued)
•
•
•
•
•
Note: You cannot assign the Options key to a DN or feature key.
Goodbye key The Goodbye key terminates an active call.
Hold key Press the Hold key to place an active call on hold. An icon displays that indicates
the call is on hold. Press the Line key to return to the call on hold.
Handsfree/ Press the Handsfree key to use the speaker (with built-in microphone), instead of
Group Listen the handset/headset. The handsfree indicator lights when the mode is on. Take the
key and handset off-hook or use options mode to switch back to the handset/headset at any
time during the call. Refer to the Service Order Reference Manual for Group Listen
indicator
functionality.
Mute key and Press the Mute key to mute the call. The microphone is muted in handsfree mode
indicator and the indicator flashes. Press the key a second time to talk.
Prime DN key Take the handset off-hook or press the DN key to access the DN. Press the DN
key for on-hook dialing or to take a call off hold. This is a self-labeled key that
displays the DN assigned to key 1. This key is also key 3 used for DNs and
features. Press the shift key to access key 3. The prime DN key can only be used
as a DN key.
Second Line/ You can use this key as a second DN or as feature key 2. This is a self-labeled key
Feature key that displays the DN or feature assigned to the key. This key is also key 4 for DNs
and features. Press the shift key to access key 4.
Headset with Activate this key for headset use. The LED lights when the set is in headset mode.
LED key
Message key This is a fixed feature key that corresponds to feature/option key 17. You must
program this key using SERVORD. Although it is permanently labeled as
Message, it does not have to be datafilled as such. In order to access voice mail
without a message waiting, Nortel Networks recommends assigning Message to
key 1 and Autodial to the Message key (key 17.) The Autodial key should be
programmed with the voice mail system DN.
Quit key Use the Quit key for applications and features.
Meridian SL-100 M3900 Meridian Digital Telephones Reference Guide
Call Timer Enable – automatically time all calls and display the time for 10
seconds after the call disconnects
Date/Time Format – select the time and date format to display when the
phone is idle
Key Click Enable – provide audible feedback when using the dial pad (no
feedback is given when the option is off)
On-hook Default Path – open the voice path automatically to headset or
handsfree
Display Diagnostics – provide a display self diagnostic test
Group Listening Control – activate and deactivate group listening
M3903 enhanced telephone 47