Troubleshooting For Io-Link Systems - Omron NX Series User Manual

Troubleshooting for IO-Link Sys-
tems
NX/GX-series IO-Link System User's Manual (W570)
This section describes troubleshooting for IO-Link Systems.
10-1 IO-Link Error and Device Error Notifications and Checking Methods .... 10-2
10-1-1 Overview ....................................................................................................... 10-2
10-1-2 Checking for Errors ....................................................................................... 10-7
10-1-3 Error Notification with the I/O Port Error Status in the I/O Data .................... 10-7
10-1-4 Error Notification with the Sysmac Error Status in the I/O Data .................... 10-7
10-1-5 Error Notification with Emergency Messages (GX-type IO-Link Mas-
ter Units Only) ............................................................................................... 10-8
10-1-6 Error Notifications Based on the AL Status (GX-type IO-Link Master
Units Only)....................................................................................................10-11
10-1-7 Checking for Errors and Troubleshooting with the Indicators on the
Front Panel of the IO-Link Master Unit........................................................ 10-13
10-1-8 Assumed Causes and Corrections for Other Errors.................................... 10-20
10-2 Checking for Errors and Troubleshooting with Tools ............................ 10-22
10-2-1 Checking for Errors from the Sysmac Studio .............................................. 10-22
10-2-2 Checking for Errors from Support Software Other Than the Sysmac
Studio .......................................................................................................... 10-23
10-2-3 Sysmac Error Tables ................................................................................... 10-24
10-2-4 Sysmac Error Descriptions.......................................................................... 10-30
10-2-5 Reading Event Logs from a Tool ................................................................. 10-53
10-2-6 Clearing Event Logs from a Tool ................................................................. 10-53
10-2-7 Exporting Event Logs from a Tool ............................................................... 10-54
10-3 Backing Up Settings and Replacing Units............................................... 10-55
10-3-1 Backup and Restore Methods ..................................................................... 10-55
10-3-2 Replacing the IO-Link Master Unit or IO-Link Devices................................ 10-57
10-3-3 Replacing the IO-Link Master Unit and IO-Link Devices at the Same
Time............................................................................................................. 10-59
10
10
10-1