Omron NX Series User Manual page 130

6 IO-Link System Communications
IO-Link Master
Units
NX-type
The controller can access the relevant NX objects of the IO-Link Master Unit using the CIP object
(i.e., Read NX object (33 hex) or Write NX object (34 hex)) of the EtherNet/IP Coupler Unit.
For details on how to access the relevant objects of the IO-Link Master Unit, refer to the NX-
series EtherNet/IP Coupler Unit User's Manual (Cat. No. W536) and A-3 How to Access the IO-
Link Devices with Message Communications on page A-25.
For details of the communications instructions, refer to the instructions reference manual for the
connected CPU Unit or Industrial PC.
• Using a CJ/CP/CS-series PLC as the Controller
IO-Link Master
Units
GX-type
*1. This is the Smart FB.
For details on how to use this Smart FB, refer to the Smart FB Library Reference in Help of CX-
Programmer.
6-14
Read instructions
CIPSend (Send Explicit Message) instruction
CIPUCMMSend (Send Explicit Message) instruction
Read instructions
_IOL003_ReadObjEip (Read IO-Link
*1
Device Object)
Write instructions
Write instructions
_IOL004_WriteObjEip (Write IO-Link De-
*1
vice Object)
NX/GX-series IO-Link System User's Manual (W570)