Details On Status And Software Switches Other Than For I/O Data; Status - Omron NX Series User Manual

5-2
Details on Status and Software
Switches Other Than for I/O Data
This section gives details on the status and software switches other than for I/O data.
Status or software switches are given in the following tables. Monitor or set them for each port.
None of these status and software switches are backed up or restored.
Refer to the list of objects in the user's manual for the IO-Link Master Units for the details on objects.
5-2-1

Status

Setting (= object
name)
*1
Lost Frames
NX/GX-series IO-Link System User's Manual (W570)
5 Status and Software Switches Other Than for I/O Data
Description Default
This is the total num- 00 hex
ber of lost frames of
IO-Link cyclic com-
munications for the
ports. If you write a
value, totaling the
number of retries
starts from the written
value. Write 00 hex
to reset the total.
NX-type IO-
Link Master
Unit
Setting range
Sub-
Index
index
500E 01 to
*2
00 to FF hex
hex 04 hex
GX-type IO-
Link Master
Unit
Subin-
Index
dex
A0*0 02 hex
*3
hex
5
5-3