Omron NX Series User Manual page 247

Event
Event code
name
10410000 hex Control Pa-
rameter Er-
ror in Mas-
ter
40200000 hex NX Unit
Processing
Error
NX/GX-series IO-Link System User's Manual (W570)
Meaning
An error occurred in For the NX bus of CPU Units
•
the control parame-
The power supply to the CPU
ters that are saved in Unit was turned OFF while
the master.
writing the Unit operation set-
tings was in progress. Or
there is an error in the area of
the non-volatile memory in
the CPU Unit in which the
Unit operation settings for the
relevant NX Unit are saved.
For Communications Coupler
Units
•
The power supply to the
Communications Coupler
Unit was turned OFF while
writing the Unit operation set-
tings was in progress. Or
there is an error in the area of
the non-volatile memory in
the Communications Coupler
Unit in which the Unit opera-
tion settings for the relevant
NX Unit are saved.
•
A fatal error occurred An error occurred in the soft-
in an NX Unit.
ware.
10 Troubleshooting for IO-Link Systems
M
Assumed cause
a
j
Level
I
M O
Reference
P n
i b
rt f
n s
o
¡ page
10-32
¡ page
10-33
10-25
10