File Format (Selecting A File Format For Output Data) - Xerox Wide Format 6705 System User Manual

Uneven-Toned Background
Select this when scanning a document having a non-uniform
background typically due to paste-ups.
Selecting this displays the [Original Type] screen, where you
can adjust the unevenness level in 80 steps.
The Uneven-Toned Background option is for use

Important
with the text and line drawings. Do not use this
option for photo documents such as posters.
Since the effect of this option varies depending

on the selected unevenness level, check the
copied output to see the result.
3.7.6

File Format (Selecting a File Format for Output Data)

The following describes how to set the file format in which the machine saves scanned data.
For information on file size limitations and the number of pages within a multiple-page image, refer to "Notes

Refer
and Restrictions on the Use of the Scan Feature" (p. 354).
Steps
St
1.
Select the output file format.
You can change the file format displayed on the

Note
[Scan Job] screen. For information on how to do
this, refer to "Preset Buttons" (p. 319).
Single-Page TIFF
Select this to save each page of the document to one file in
TIFF format.
Multi-Page TIFF
Select this to save multiple pages of the document to one
file in TIFF format.
Single-Page PDF
Select this to save each page of the document to one file in PDF format.
Multi-Page PDF
Select this to save multiple pages of the document to one file in PDF format.
More...
Displays the [File Format] screen.
Refer to "[File Format] Screen" (p. 142).

Refer
3.7 [Store to Folder] Screen
3
141