Xerox Wide Format 6705 System User Manual page 262

Error Message
Memory is full.
Failed to connect to send
destination.
Server Name /
IP Address:
Shared Name:
Save In:
8
Failed to connect to send
destination.
PC Save Add.1: xxx
PC Save Add.2: xxx
Printer1: xxx
...
Printer5: xxx
Cannot send to these
addresses.
Please change the settings.
8.9 Error Messages
262
Cause
The machine cannot start the Scan to PC or
Multi Send Scan job because free space is less
than 2MB.
An error has been detected in the settings of
the destination server for a Scan to PC job
while attempting to establish connection.
Settings such as the server name are

incorrect.
The server is turned off.

Unable to resolve the names such as the

server name.
The specified user name and/or password is

incorrect.
The folder name is incorrect/the folder does

not exist.
The folder is not shared.

There is a LAN failure (including

disconnection and bad connection of
cables).
An error has been detected in the settings of
the destination servers for a Multi Send Scan
job while attempting to establish connection.
Settings such as the server name are

incorrect.
The servers and/or printers are turned off.

Unable to resolve the names such as the

server name.
The specified user name and/or password is

incorrect.
The folder name is incorrect/the folder does

not exist.
The folder is not shared.

The logical printer name is incorrect.

There is a LAN failure (including

disconnection and bad connection of
cables).
Remedy
Wait for a while until the current job is

completed and free space is made
available.
Clear the causes shown to the left, and

run the scan job again.
Clear the causes shown to the left, and

run the scan job again.
Exclude the destination addresses for

which the connection error is indicated.