Authentication Policy - Xerox Wide Format 6705 System User Manual

3.
Fill in the [User ID] and [Password] fields, and click [Login].
By factory default, the User ID is "11111", and the password is "x-admin".

Note
4.
Set up the authentication server.
Refer to the following setup procedures:
Authentication Policy ...........................................................................................................................................................................p. 237

 Authentication System ........................................................................................................................................................................p. 238
 LDAP Server / Directory Service ........................................................................................................................................................p. 238
 LDAP Authentication ............................................................................................................................................................................p. 239
 Custom Filters..........................................................................................................................................................................................p. 239
 SSL / TLS Settings ..................................................................................................................................................................................p. 240
Authentication Policy
(1)
Select [Properties] > [Security] > [Authentication] > [Authentication Policy].
(2)
Select [Login to Remote Accounts] for [Authentication Settings].
(3)
Set each of the other items indicated in the rectangle in the figure below.
(4)
Click [Apply].
7.6 Enabling Remote Authentication
7
237