Xerox Wide Format 6705 System User Manual page 297

Scan Start Mode
Allows you to select whether to start scanning automatically or by pressing the <Start> button, after an document
has been loaded.
Select [Auto Start] or [Manual Start]. The factory default is [Auto Start].
This setting is effective for copy and scan jobs.

Note
Auto Start
Select this to start scanning automatically after an document has been loaded.
Manual Start
Select this to start scanning by pressing the <Start> button on the control panel.
Special Size Setting
[Special Size Setting] is displayed when the item

Note
number [70] in [Detailed Settings] is set to [2]. For more
information, refer to "Detailed Settings" (p. 299).
Allows you to set the Special A Series sizes.
The factory defaults are:
Series Item
Special A0 Wide 880mm
860mm
Special A1 Wide 625mm
620mm
Special A2 Wide 440mm
435mm
Data Encryption
Allows you to select whether to encrypt data recorded on the
machine's hard disk.
When data encryption is enabled, the machine automatically
encrypts copy, scan, and print data before writing these data to
its hard disk. Whether to encrypt data cannot be set for individual
features. Encrypting data prevents unauthorized users from
reading data stored on the hard disk, even if the hard disk is
stolen.
When you select [On], enter an encryption key of 1 to 12 digits in
both [New Encryption Key] and [Re-enter New Encryption Key].
If you choose not to encrypt data, select [Off]. The factory default is [Off].
Factory Default
880mm
620mm
440mm
9.3 Common Service Settings
9
297