Advertisement
Changing the IP address
The default IP of the converter is: 192.168.1.100. If you like to change the IP address, follow the instructions bellow.
1. Connect the converter ACL800FL-CONV-W directly to the PC.
2. Change the IP address of the PC, to the same range as the converter's IP address (192.168.1.XXX)
3. Open Browser or ACL800 BioManager (as explained in the next chapter) and change the IP to the desired one. Save.
Figure 2: Wiring instructions
Configuration
From Web Browser:
1. Write the IP as URL (default http://192.168.1 100)
2. Write the username and password
(default Username: admin; Password: 00000000)
Figure 3: Authentication and settings
From ACL800 BioManager:
Right click on "Portals" and select "Search Network
Portals".(Figure 4)
Figure 5: Search portals
Click "search" then click the setup button for the connected
converter. (Figure 5)
Figure 4: Search Network portals
P/N 1073494A• REV 00.00 • ISS 4JUL18
2 / 3
Advertisement
