Installation And Commissioning Concept; Overview; Ets App (Dca) - Theben DALI gateway S64 KNX User Manual

Installation and commissioning concept

3 Installation and commissioning concept
The commissioning is separated in following steps:
3.1

Overview

After the wiring of the DALI segment according to the operating and installation instructions
software start-up can begin.
To do this, the product database is loaded and the corresponding ETS App installed in the ETS5,
see chapter 3.3 ETS app (DCA).
3.2

ETS app (DCA)

The application for the DALI gateway KNX is based on the standard surface for the configuration
of communication objects and parameters as well as a special surface for configuring the DALI
bus system. This special surface is designed as a DCA (Device Configuration App) for the ETS5.
All required program data are automatically created when the App is imported.
Therefore click on Button „App" in the footer of ETS5 and then the „plus" sign in order to add an
ETS App to your ETS5 system:
Manual DALI gateway S64 KNX/S128 KNX 9