Ets Communication Objects; General Objects - Theben DALI gateway S64 KNX User Manual

8 ETS communication objects

The DALI gateway KNX communicates via the KNX bus based on a powerful communication
stack.

2-channel device: All communication objects of the 1st channel are marked with the
prefix D1- and those of the 2nd channel with the prefix D2-. In the following documen-
tation, the prefix is not displayed because the subjects repeat for each channel accor-
dingly. The object numbers of the 2nd channel can be calculated via an offset of 640.
8.1

General objects

The date and time are defined across all channels for the whole device. In the 1 channel device
object number 21 and 22 has been used. This was changed for the 2-channel device to object
number 1 and 2. The general communication objects exist for each channel and apply to the
function of those channel.
Object list for 1 channel device:
Object list for 2 channel device:
For time-controlled sequencing, the current date and time are required. These need to be made
available via the bus. Two objects are available for this purpose.
Manual DALI gateway S64 KNX/S128 KNX
ETS communication objects
22