Dali Commissioning - Theben DALI gateway S64 KNX User Manual

DALI commissioning

11 DALI commissioning
Following the physical installation and wiring of the DALI ECGs and lights and the electronic
commissioning, the connected ECGs need to be learned in.
To do so, please open the commissioning site in the DCA:
The group configuration is displayed in a tree structure on the left-hand side. The middle part
shows a table for the ECG configuration and names. A list on the right-hand side shows the
actual devices found in the system that have not yet been identified. During the planning phase
the list is empty as the ETS is not yet connected to the system.
To start with you should plan and name the ECGs. Use the description field to enter a name
(light number, room number, etc).
Double-click to display an editing window which will allow you to enter a maximum of 30
characters opened.
Now assign the individual ECGs to their corresponding groups. Use drag and drop to pull the
ECGs onto the required group in the tree structure on the left-hand side.
Once an ECG has been assigned to a group via drag and drop, the group number is
automatically dis-played in the 'group number' field of the ECG configuration table. If a group
assignment has to be solved again, the command is in the context menu of the ECG
configuration table.
Manual DALI gateway S64 KNX/S128 KNX 63