Improvements To The Previous Firmware 0.2 - Theben DALI gateway S64 KNX User Manual

• The DT-8 sub-type PrimaryN is not supported.

The special surface for the configuration of DALI segments is designed as a DCA (Device
Configuration App) for the ETS5. Please remember to install the corresponding ETS App
in addition to the product database. knxprod. The ETS App is available for download on
the Theben website or from KONNEX.
2.4 Improvements to the previous firmware 0.2.x
Firmware 0.3.3 also introduces a new ETS application and a new DCA. This firmware requires
the ETS application program and DCA in version "V2"
DALI Gateway S64 KNX V2 or
DALI Gateway S128 KNX V2 and the associated DCA
DALI gateway S KNX V2
Commissioning with the old application and the old DCA is not possible.
2.4.1 Single ECG control
Special attention is now given to the possibility of single ECG control.
Single ECGs can be addressed in scenes, in schedules or via KNX communication objects.
Manual DALI gateway S64 KNX/S128 KNX
RGB (DT-8 Sub-Type RGBWAF)

HSV (DT-8 Sub-Type RGBWAF)

RGBW (DT-8 Sub-Type RGBWAF)

Support of time scheduling programs to control groups and ECGs

according to values and/or colour
Different operating modes such as permanent mode, night-time mode or

staircase mode
Integrated operating hours counter for each group and ECG with an alarm

for when the maximum lifespan has been reached
Individual fault recognition with objects for each light/ECG

Complex fault analysis at group/device level with number of faults and

fault rate calculation
Fault threshold monitoring with individually configurable threshold values

Scene module for extensive scene programming and possibility of

dimming scenes,
"Quick exchange function" for easy replacement of individual faulty ECGs,

Manual control of group and broadcast telegrams via control buttons on

the device,
Indication of a fault status via LEDs on the device.

General product information
7