Group Objects - Theben DALI gateway S64 KNX User Manual

8.4

Group objects

For each one of the up to 16 possible groups, a set of 26 communication objects is available.
The following objects are available (Example group 1):
Obj Object name
71 G1, Switching
This object is used to switch group 1 on or off.
72 G1, Dimming
This object is used for the relative dimming of group 1. Bit 4 is set to dim up and deleted to
dim down. Bits 1 to 3 refer to the increment size. Bit 1 to 3 deleted is interpreted as a stop
telegram.
73 G1, Set Value
Sets the value of group 1.
Object 73 is shown for the following parameter: G1  behaviour  additional value setting
object with dim time
74 G1, Set Value
Group 1 can bet set to a certain value and dim time via this object.
For this data point, time is defined as a multiple of 100 ms. Because of the DALI specific
features, a value range from 1 s to 200 s is accepted. Values outside of this range are
restricted accordingly.
A dim time of 10 s is coded as follows:
10 s = 10x10x100 ms
Object 74 is shown for the following parameter: G1  General  Function of the additional
object
75a G1, Enable
Manual DALI gateway S64 KNX/S128 KNX
Function Type
On/Off 1 Bit
1.001
Brighter/Darker 4 Bit
3.007
Value 1 Byte
5.001
Value/Time 3 Byte
225.001
Yes/No 1 Bit
1.003
ETS communication objects
Flags
CW
CW
CW
CW
CW
27