Action Types - Theben DALI gateway S64 KNX User Manual

Time control
Delete action
Deletes a selected action.
Sort by time
Sorts the action list into ascending chronological order.
Sort by function
Sorts the action list according to function entries.
Test action
Immediately executes the chosen action (without regard for any potentially configured transition
time) for all selected groups within a template. A connection to the DALI gateway KNX is
required.
Test action of the group
Immediately executes the chosen action (without regard for any potentially configured transition
time) for a certain group within a template. You can also select the group via the context menu.
A connection to the DALI gateway KNX is required.

13.2 Action types

Once you have created an action, the corresponding function can be set via the selection box.
For each function, you can select a value, the time of the action and (if you would like the value
to slowly cross-fade) a transition time. If you do not want the action to be performed every day,
please enter the days of the week when you want to schedule the action.
Please remember that only certain value ranges make sense for each function. In principle any
value can be entered in the value field. However, if this value exceeds the possible value range,
it is automatically limited to the maximum value. (For example, if you enter 200 for the function
"Set value", the maximum value 100 % is automatically entered.) The following functions are
possible for an action:
Set value
This function sets the brightness level of a group. The permitted value range is between
0 and 100 %.
Value
This function sets the minimum dim value of the selected group for relative (4 Bit) and absolute
(8 Bit) dimming. When using this action, any minimum dim value set in the ETS parameters is
automatically over-written. The permitted value range is between 0 and 100 %.
Min. value
This function sets the minimum dim value of the selected group for relative (4 Bit) and absolute
(8 Bit) dimming. When using this action, any minimum dim value set in the ETS parameters is
automatically overwritten. The permitted value range is between 0 and 100 %.
Max. value
This function sets the maximum dim value of the selected group for relative (4 Bit) and absolute
(8 Bit) dimming. When using this action, any maximum dim value set in the ETS parameters is
automatically overwritten. The permitted value range is between 0 and 100%.
Colour temperature
This function sets the colour temperature of DT-8 devices that support the colour temperature
setting (TC).
On the ECG the colour is also changed if the light is turned off at the time of the action.
Manual DALI gateway S64 KNX/S128 KNX 80