Scenes
12.3 Programming scenes
Once all scene values have been set, you need to download the scene onto the DALI ECGs. For
this purpose, please press the download button in the top right-hand corner.
A connection to the DALI gateway KNX is required. In principle, you can also plan individual
scenes in the ETS 'offline', independently of the DALI system. The DCA only has to be connected
to the gateway for the duration of the programming.
12.4 Testing a scene event
One way to test the settings for an event is via the context menu (right click with the mouse).
A connection to the DALI gateway KNX is required. The command setting the value and colour of
the group is executed. This means you can check the correct properties before programming the
whole scene. If „Keep Value" or „Keep colour" have been selected, the current values are kept
and the new values are not activated.
12.5 Testing the whole scene
After a scene has been programmed, the button becomes active. Press the button to activate
and execute the selected scene. A connection to the DALI gateway is required for this purpose.
12.6 Export/import/delete
In order to be able to reuse a scene that has already been created, it is possible to export it. The
created XML file can be saved separately to be used again in another project or in another
template. The com-mands for export or import can be found in the context menu.
The template is saved as an XLM file in the desired target directory.
Manual DALI gateway S64 KNX/S128 KNX
77