Group - Theben DALI gateway S64 KNX User Manual

9.2

Group

Three parameter pages are available for group settings.
The parameters are described below.
9.2.1 General
Parameter
Group description
Use this parameter to define a group description. To simplify the overview, this description will
be displayed for all communication objects.
For example: Test group
Operation Mode
Sets the operating mode of the group.
If "Permanent" Mode is selected.
Manual DALI gateway S64 KNX/S128 KNX
Settings
Normal Mode
Permanent Mode
Normal /Night Mode
Staircase
ETS parameters
44