Confirming The System Configuration; V430-F Series System Configuration - Omron V430-F Series User Manual For Communication Settings

1 Communication Specifications Overview
1-1

Confirming the System Configuration

This product is a multi-code reader that captures images of 1D symbols (barcodes) and 2D Symbols
and reads and processes their embedded data.
In a system configuration in which it is connected to a PLC, PC, or other external device, serial com-
mands can be received from, and code reading results can be output to the external device.

V430-F Series System Configuration

1-1-1
The V430-F can be used in the following types of system configurations.
Connection using Parallel I/O Interface
Trigger inputs and OK/NG Judgement result outputs are received and sent over I/O cable.
Basic configuration
Code Reader
*1
*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
Connecting over Ethernet (EtherNet/IP, Serial (TCP), PROFINET)
Establish network connections via an Ethernet cable to input triggers and communication commands
and to output reading results (Judgment results and decoded content). Triggers can also be input over
parallel I/O. Using the data link function for each network (excluding Serial), data transfer can be done
periodically between the code reader and the external device.
Basic configuration
Code Reader
Switching hub
for EtherNet/IP
(industrial
Ethernet)
*1
1 - 2
Special Ethernet cable
Computer
WebLink or ESP
Special Ethernet cable
General-purpose
Ethernet cable
General-purpose
Ethernet cable
Computer
WebLink or ESP
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
External devices
Trigger sensor
I/O cable
I/O control PLC
External devices
Trigger sensor
I/O cable
I/O control PLC