Omron V430-F Series User Manual For Communication Settings page 83

For example, the following is the command to query the current Exposure time and Gain settings
and its Response.
・Status Request command
< K
・Response
<
Header (Preamble)
Additional Information
The Response includes a Header (Preamble) and Footer (Postamble). The defaults for these
are Header: None and Footer: CRLF (hexadecimal: 0D0A).
• When the Serial Verification function is enabled (by default: disabled), the current setting status
is returned as the response to the K command. If you want to confirm that the K command was
applied correctly, please enable the Serial Verification function.
・K command (when the Serial Verification function is enabled)
< K
・Response
<
Header (Preamble)
Additional Information
The Response includes a Header (Preamble) and Footer (Postamble).
 Command Format for the Serial Utility
• For the Serial Utility commands, there are commands for which there is a response and com-
mands for which there is no response. The format of the response differs with each command.
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
3 Controlling Operation and Data Output with Ethernet
5 4 1 ? >
The current settings of the request K command
K 5 4 1 , 2 0
5 4 1 , 1 0 0
The current settings of the request K command
K 5 4 1 , 1 0
0 0 , 3 0 > CR LF
Footer (Postamble)
0 >
0 0 , 3 0 CR LF
>
Footer (Postamble)
3
3 - 39