Omron V430-F Series User Manual For Communication Settings page 17

*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
Connecting by Serial (RS-232)
Triggers and Serial command input, as well as Read result judgement and Read string content
data output is transmitted over RS-232C cable. Triggers can also be input over parallel I/O.
Basic configuration
Code Reader
*1 Special Ethernet cable
*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
Additional Information
The cable to use for Serial (RS-232C) communication is RS-232C- I/O 2-way cable (V430-
W2-3M) specifically for the V430-F. Please use this cable when connecting to a PC by RS-232C.
For wiring different from that of IBM compatible PC, either make your own converter cable, or use
the discrete wire cable type (V430-W8□ Series) with its RxD signal and TxD signal converted.
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
I/O cable
RS-232C cable
Computer
WebLink or ESP
1 Communication Specifications Overview
External devices
Trigger sensor
I/O control PLC
1
1 - 3