Q3.
When logging onto my system, I am
receiving the following error message: "The
machine is not authorized to perform this
function."
This error message is typically a result of the LVS-95XX device not being
recognized. To resolve this issue, close the LVS-95XX software and unplug the
USB from your computer that is attached to the system. Plug back in another USB
port on your computer wait 10 seconds. Then, reopen the software. If this step
does not resolve the issue, follow the remaining steps.
Make sure that you have administrator privileges to the computer prior to install.
1. Close the LVS-95XX software.
2. Unplug the USB cable of the LVS-95XX system from the computer.
3. Go to Installation Flash Drive "Other setup" folder click "Keysetup.exe."
4. Select "Keylok 2 (USB w/ Driver)" and "Standalone."
5. Click the "Begin Install" button. A message appears indicating that all files have
been copied. Close the dialog box.
6. Plug in the USB cable.
LVS-95XX Frequently Asked Questions
Page 6 of 17