Throttle Lever Free Play Check And Adjustment - Yamaha WaveRunner FZR-GX1800 Service Manual

CHK
ADJ
Control system
a
1
a
9. If the QSTS rod cannot be properly
adjusted using the rod joint at the jet pump
end, check the rod joint at the QSTS con-
verter end.
Refer to "QSTS grip and converter disas-
sembly" in Chapter 8.
Throttle lever free play check and
adjustment
1. Measure:
• Throttle lever free play a
Out of specification → Adjust the throttle
lever free play.
Throttle lever free play a:
2.0–5.0 mm (0.08–0.20 in)
2. Adjust:
• Throttle lever free play
Adjustment steps:
TIP
• Follow all the steps if the throttle cable has
been replaced, or if it has been disconnected
from the APS.
• Follow only steps 7–17 if the throttle cable
has not been disconnected from the APS.
1. Face the handlebar straight ahead.
2. Remove the service lid.
Refer to "Front hood removal" in Chapter
8.
3. Slide the boot 1.
4. Check that the throttle cable installation
length a is within specification.
Throttle cable installation length a:
18.4 ± 1.0 mm (0.72 ± 0.04 in)
3-5
E
1
2
4
5
6
7
8
9