Yamaha WaveRunner FZR-GX1800 Service Manual page 312

– +
ELEC
4
$
1
!
%
Remote control system
1
3
2
&
2
±
#
Checking steps:
1. Push the unlock button 1. The buzzer
sounds 2 times.
2. Check that the "UNLOCK" indicator light
2 comes on.
3. Push the unlock button 1 for more than 4
seconds. The buzzer sounds 3 times.
4. Check that the "L-MODE" indicator light 3
comes on.
5. Push the lock button 4. The buzzer
sounds once.
6. Check that the "UNLOCK" indicator light
2 goes off.
TIP
While the engine is running, input from the
remote control transmitter is not received.
Number of beeps
1 beep
2 beeps
3 beeps
2. Measure:
• Remote control transmitter battery
voltage
Below specification → Replace the
remote control transmitter battery.
Measurement steps:
1. Remove the transmitter cover 1.
TIP
Loosen the transmitter cover screws 2 in the
sequence shown.
7-57
E
Yamaha Security
System mode
Lock
Unlock
(normal mode)
L-MODE
(low-rpm mode)
1
2
3
4
5
6
8
9