POWR
Engine unit
k
n
m
q
r
l
m
o
p
q
r
30. Remove the muffler assembly bolts k,
and then remove the muffler assembly l.
TIP
When removing the muffler assembly, move it
forward and separate it from the water lock.
31. Remove the electrical box bolts m, and
then remove the electrical box n.
32. Remove the coupling cover bolt o and
collar, and then remove the coupling cover
p.
33. Loosen the engine mounting bolts q.
34. Lift the engine unit slightly, remove the
shims r, and then lower the engine.
TIP
Make a note of the position of each removed
shim so that it can be installed in its original
position.
35. Remove the engine mounting bolts q.
5-14
E
1
2
3
4
5
6
7
8
9