Declaration Of Conformity According To Ec Directives - Roland R4000 Manual

B0059001 / Rev. 2.3

Declaration of conformity according to EC directives

Manufacturer:
Product name:
Product type:
Roland Electronic GmbH declares that the product listed above complies with the requirements of
the directives listed below.
Applied Directives:
2014/35/EU
2014/30/EU:
Date of mark's apposition: 10.05.2016
Keltern, 10.05.2016
Place, Date
The declaration confirms the compliance with the cited directives. However, it is not any implied warranty of fitness for a
particular purpose especially as it may relate to product liability.
The safety instructions and warnings must be observed.
Pos: 6 /Komponenten a llgemei n/Lee rseite @ 0\mod_ 116 5223 317 234 _501. docx @ 2 343 @ @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Roland Electronic GmbH
Otto-Maurer-Str. 17
75210 Keltern / Germany
SND40
Weld Seam Detection System
R4000
Low Voltage Directive
EN 61010-1:2010
EMC Directive
EN 61000-6-2:2005/AC:2005
Signature
ISO 9001 : 2008
Reg.-no. 5152 QM08
Manual
EN 61000-6-4:2007/A1-2011
Managing Director
Function of the signer
Safety advice
7