Table of Contents
Advertisement
4.6 Device Data tab
The Device Data tab displays information about the plotter/scanner devices used with
Xi Repro System. It also allows devices to be edited.
• Device ID
Displays the Device IDs to identify the devices. These IDs are also displayed under
the Printer tab and Scanner tab.
• Device Name
Displays the model names of the devices.
• OpMode
Indicates whether a device is to be used only as a printer, only as a scanner or as
both. The code "1" means it is used only as a printer, "2" means only as a scanner
and "3" means it is used both as a printer and scanner.
• Enabled
Indicates whether the device is available for use by Client. The code "1" means it is
available (enabled) and "0" means not available (disabled).
• Controller
Indicates whether an interface card is used. The code "1" means an interface card
is used and "0" means not used.
Using Admin
4-13
Advertisement
Table of Contents
