Table of Contents
Advertisement
Troubleshooting
7. Troubleshooting
7.1 Troubleshooting
Trouble
Xi Repro System cannot
be operated.
The copier cannot be
controlled via the copier
operation panel.
Printing from Xi Repro
System is disabled.
Tail of the scanned
image is not printed.
7-2
Check procedure/corrective measures
Check if the copier power is turned on.
Check if the copier is offline. If it is, reset
it.
Check if the on-line indicator of the copier
is on. If not, turn it on by pressing the on-
line key.
Check if the machines are connected
correctly.
Check if the on-line indicator of the copier
is on. If it is, turn it off by pressing the on-
line key.
If the Print Problems dialog box is dis-
played, follow the instructions to remove
the cause.
Check if the Windows NT network is con-
figured correctly.
Check "Long Plot" when scanning origi-
nals 72" or longer.
Reference
page
2-5
2-7
2-3
2-7
3-27
Advertisement
Table of Contents
