Table of Contents
Advertisement
Appendices
9.3 Pen patterns
Figure 9-1 shows the pen patterns that are used by Xi Repro System when
rasterizing HPGL/2 plot files. The patterns are defined in the patterns.dat file as
16
16 pixel blocks. The pattern file can be modified to add additional patterns.
In general, patterns 0 through 15 are designed to be used for line work. Patterns 16
through 29 are designed for filled areas. Patterns 30 and 31 are special dotted line
patterns.
The lines shown in this manual may not accurately represent what Xi Repro System
will produce on a copier.
9-4
Advertisement
Table of Contents
