Network Plotting
6.4 Returning to local mode
In network mode, the Local Client application only provides plotter server facilities. In
order to use other Client facilities, it is necessary to return to local mode.
There are three ways to return to local mode:
"Immediately": Click on this button to return to local mode, even in the middle of the
current plot.
"After Current Plot": Click on this button to return to local mode after the current plot.
Even if there are other plots remaining in the print job, only the current plot will be
printed.
"After Current Job": Click on this button to return to local mode after the current job.
All the plots in the print job will be printed.
6-10