Table of Contents
Advertisement
2.1 Connecting the machines
Perform the following steps to install the interface card and connect the machines.
1. Turn the power to both the computer and copier off.
2. Remove the computer cover. Locate an available PCI slot and remove its bracket
and screw.
3. Insert the interface card into the PCI slot by pressing it evenly until it sits correctly
in the slot. Check for correct insertion and secure the card with a screw.
4. Refit the computer cover.
5. Connect the PCI interface cable between the copier and computer.
6. Turn the power to the computer and copier on and then proceed to 2.2 Installing
Xi Repro System .
System Installation
2-3
Advertisement
Table of Contents
