Kyocera Xi3648 Instruction Handbook Manual page 8

1.2 System configuration
The system configuration is shown in Figure 1-1.
Xi Repro System is to be installed on a computer running Windows NT. When
connected to a copier via a PCI interface cable, a computer running this software
performs as a plotter server. In such a system configuration, this computer is called
the Local Client.
Computers that have this software installed and use the copier connected to the
Local Client are called Remote Clients.
The Local Client also provides Remote Client facilities.
Plotter controller system
Local Client
(Xi Repro System)
Interface
card
PCI interface cable
Windows NT
Remote Client
(Xi Repro System)
Windows NT
Remote Client
(Xi Repro System)
Windows NT
Remote Client
(Xi Repro System)
Windows NT
Figure 1-1 System configuration
Interface
Digital copier
relay
PCB
Overview
1-3