Kyocera Xi3648 Instruction Handbook Manual page 20

5. Select "Local System Status" from "View" in the menu bar.
6. The Local System Status screen appears. The "Status-OK" message is displayed
at the top right of the screen if communication is good.
7. Click on the "Close" button to close the screen.
Check the following if the "Status-OK" message is not displayed in the Local System
Status screen.
• Is the copier power turned on?
• Is the copier offline status reset?
• Is the copier on-line indicator turned on?
• Are there any error messages on the copier display?
• Is the PCI interface cable connected correctly?
• Is the interface card inserted correctly?
System Installation
2-9