Kyocera Xi3648 Instruction Handbook Manual page 33

Using Client
3.5 Inserting and deleting a plot
3.5.1 Inserting a plot
An existing image file can be inserted as a plot into a set. Scanned image data can
also be inserted as a plot (see 3.12 Scanning ).
Perform the following steps when inserting an image file as a plot into a set.
1. Select the set where the image is inserted from the sets/members tree.
2. Select "Image" in the Insert menu or click on the
select dialog box is displayed.
3. Select the file to be inserted and click on the "Open" button. Only file formats
accepted by Client can be inserted (see 9.4 Plot file formats ).
3.5.2 Deleting a plot
To delete a plot, select the file to be deleted and press the delete key.
3-12
button in the toolbar. The file