Table of Contents
Advertisement
Using Client
1 Project
Displays the project filename.
2 Set
One per project.
A project can be compared to a box to which a plot, stamp and pen set are
added. Multiple plots inserted in the set can be printed at one time.
3 Plot
An image file added to the set. Print and other settings can be defined for each of
the inserted plots. Data from scanning a hard copy can also be added as a plot.
See the appendix for a list of the acceptable file formats.
4 Pen set
Used when selecting pens for printing: can be set when a plot is a vector file
format.
5 Stamp
Useful for printing the date and operator names over the plot file image. Since
stamps are stored independently as stamp files, the contents of a stamp can be
modified without affecting a plot.
6 Member
Each of the plots, stamps or pen sets added to a set.
7 Sub-sets
Can be created in a set by dividing multiple plots in a set into groups. The
illustration on the previous page shows an example of sub-sets: two sub-sets
"Sect 1" and "Sect 2" have been added. This is useful when, for example, one
wishes to print only the plots in Sect 2.
3-10
Advertisement
Table of Contents
