Selecting An Installation Method; Installing Utilities; Upgrading Driver Components; Express Installation - Kyocera TASKalfa 420i User Manual

Installation
6

Selecting an Installation Method

Installing Utilities

Upgrading Driver Components

1
2
3

Express Installation

Installing in Windows Vista and Windows XP

1
1-2
The Installer wizard appears with several installation methods displayed.
The installation differs based on your operating system and connection method.
Select your operating system and connection method from the following list and
proceed to the reference page to continue the installation.
Express Installation
Installing in Windows Vista and Windows XP
Custom Installation
Installing in Windows Vista and Windows XP with a USB Connection
1-4
Installing in Windows Vista and Windows XP with a Network Connection
page 1-5
Note: KPrint installs a client port monitor that lets Windows TCP/IP print from
any network card connected to a printing system. KPrint supports LPR and IPP
printing. For the KPrint Installation instructions, refer to your Product Library
CD. KPrint uses a stand-alone installer.
On the Installation Method screen, click Utilities to install printer utilities. You
can also select utilities to install during the Custom Installation procedure.
If the installation wizard detects older driver or utility components, the Software
Component Upgrade page appears.
Choose the component to upgrade. Click Next.
Confirm your upgrade settings. To start the upgrade, click Upgrade.
When the upgrade completes, click Next. The Installation Method page
appears.
Express Mode applies to driver installation for a USB or network connection
only. The installation wizard discovers printers that are turned on, and
connected by USB and network cable. In Custom Mode, you are able to select
the installation packages and specify the port.
This section describes the express installation procedure of the driver software
in Windows Vista and Windows XP.
Ensure that your printer and computer are turned on and connected by USB or
network cable.
on page 1-2
on page
on
User Guide