Docking Tray Function Buttons - HotSpring HIGHLIFE GRANDEE Owner's Manual

DOCKING TRAY FUNCTION BUTTONS

In the event the remote is not nearby, you can still operate the Jets and
Lights by pressing the buttons located in the docking tray.
LIGHTS Button:
Press the Lights button once to turn on all light zones in blue. Continue
pressing the Lights button to dim all lights until the 5th press turns them
off.
JETS Button:
Press the Jets button several times to turn each sequence of jet
combinations on followed by turning all jets Off:
GRANDEE , ENVOY, VANGUARD & ARIA
1st Press Jet 2 on low speed
2nd Press Jet 2 on high speed
3rd Press Jet 1 and 2 on high speed
4th Press Jet 1 on high speed, jet 2 on low speed
5th Press Jet 1 on High
6th Press Jet 1 and Jet 2 Off
English Spanish
SOVEREIGN
1st Press
2nd Press
3rd Press
TRIUMPH, PRODIGY, JETSETTER LX & JETSETTER
1st Press
2nd Press
Pairing Dock with Remote:
Pairing is only required if the remote is within range of the dock and the
screen on the remote continues to read "Searching for Spa".
• Press and hold the JETS button on the dock until JETS and
LIGHTS buttons flash.
• Press and hold remote screen until Pairing Menu is displayed.
• Press Yes to begin the Pairing.
Changing Frequency Channel between Dock with Remote:
Change the channel if remote continues having intermittent
response when inside the 30' (9 m) usable range.
• Press and hold the LIGHTS button on the dock until JETS and
LIGHTS buttons flash.
• Press UP or DOWN on remote to change the channel number.
• Press OK to set the new frequency.
Page 18
French
Jet on low speed
Jet on high speed
Jet 1 Off
Jet 1 on high speed
Jet 1 Off
Operating Instructions