Table of Contents
Advertisement
Crestron TST-600
Configure the TST-600
Configuration Guide – DOC. 7383D
RF Setup
From the main menu, touch RF Setup to display the "RF Setup" screen.
"RF Setup" Screen
The "RF Setup" screen has Acquired and GW Online indicators to show the status of
the TST-600 and associated gateway. To the right of these is a message display area
used to show the status of acquire processes, an Acquire button used to initiate
acquires and a bar graph showing RF signal strength. Below these are controls for
setting the RF ID, RF Channel, and RF Power. At the bottom of the screen, the
Gateway UID and Gateway Name are displayed.
Before a TST-600 can be used with a Crestron control system, it must first be
acquired by a CEN(I)-ERFGW-POE Extended Range RF Wireless Gateway (sold
separately).
To acquire a TST-600:
1.
Use a stylus or other thin tipped object to press ACQUIRE on the
CEN(I)-ERFGW-POE gateway to enter Acquire mode. The accompanying
LED illuminates, indicating the unit is ready to link with the touch screen.
2.
Place the TST-600 in Acquire mode by touching Acquire on the "RF
Setup" screen. The screen displays an Acquire in progress message and the
TST-600 is automatically acquired by the gateway within 2 minutes.
5.7" Wireless Touch Screen
5.7" Wireless Touch Screen: TST-600 • 3
Hide quick links:
Advertisement
Table of Contents
